Untitled Document
 
  Untitled Document
 
 
 

Easy diameter setting with ball and adjust screw. Coated inserts offer excellent tool life.
 
Sketch name
Head shank Indexable Insert Guide Pad Sub Guide Lock Screw Guide Pad Protector
Adjust Ball Adjust Screw
 
STANDARD TOOL diameter
D(mm)
Size Diameter Standard
L E F
KUSTS0097 - xx.xx 16.01~16.70 62 10.8 12.3 14 ST0097
KUSTS0098 - xx.xx 16.71~17.70 62 11.8 13.6 15 ST0098
KUSTS0099 - xx.xx 17.71~18.90 62 12.5 14.5 16 ST0099
KUSTS0000 - xx.xx 18.91~20.00 62 13.5 15.5 17 ST0000
KUSTS00 - xx.xx 20.01~21.80 67.5 14 16 18 ST00
KUSTS01 - xx.xx 21.81~24.10 67.5 16 18 20 ST01
KUSTS02 - xx.xx 24.11~26.40 72.5 17.5 19.5 22 ST02
KUSTS03 - xx.xx 26.41~28.50 72.5 19 21 24 ST03


 

UTE Drill heads are designed with a three step single cutting edge and OD thread to fit all STS(Single Tube System) Drill Tubes. Manufactured with standard chip-breaker unless otherwise specified.
The one cutting edge design allows for s large chip mouth to eliminate chip exhaust problems.

 
STANDARD TOOL diameter
D(mm)
Size Diameter
L K d d1 PRO Diameter
UTE-0094 12.60 - 13.60 40 50.5 9.6 8.2 UB11-ES 11
UTE-0095 13.61 - 14.60 40 22.5 10.6 9.2 UB12-ES 12
UTE-0096 14.61 - 15.60 40 22.5 11.6 10.2 UB13-ES 13
UTE-0097 15.61 - 16.70 40 22.5 12.6 10.8 UB14-ES 14
UTE-0098 16.71 - 17.70 40 22.5 13.6 11.8 UB15-ES 15
UTE-0099 17.71 - 18.90 40 22.5 14.5 12.5 UB16-ES 16
UTE-0000 18.91 - 20.00 40 22.5 15.5 13.5 UB17-ES 17
 

   
Untitled Document